Project Cars
McLaren_P1.BBFbin KERS translation (some parameters common with other BFFbin files).
by Hobbnob with additional decode and notes by JDougNY
Version 1.0 - 3/14/2016 - Partial decode by Hobbnob with decode of remaining file by JDougNY

Address 0x08 = 234 // Total # of bytes in the file
Address 0x20 = 5 // Defines # of bytes at end of file.  Use of those bytes is unknown
Address 0x24 = 229 // byte count that begins at start of file and ends prior to bytes defined by address 0x20

[20 DA 4E FB A7]    {byte}03 // ??
[28 8A A4 53 E0]	// ??
[28 61 CF 84 0D]	// ??
[28 40 D5 E4 95]	// ??
[20 0E 17 DD 9A]    {byte}01 // ??
[20 67 F2 7D 57]    {byte}01 // ??
[28 08 FF 48 18 A1] {byte}68 // ??
23 F7 79 C0 2D 02 01	// ??
[28 F9 28 F9 98]	// ??
[21 D8 8E A3 C8]    {32bit decimal}1000 // ??
[21 15 CA 60 13]    {32bit decimal}60000// recharge rate
[22 8E AC AD 13]    {float}129.1 // battery size
[22 3A 74 A8 35]    {float}131.0 // stage 2 power output
[22 03 3E B2 09]    {float}0.01 // empty level. Usually set to 0.01. If set to 0.95 for example, the kers will be available until the kers has 95% remaining
[A2 02 D8 6A 19]    {float}131.0 // stage 1 power output
[28 E1 61 23 AE]	// ??
[22 13 38 E1 69]    {float}1.0 // ??
[A6 D5 2A 50 24]    {byte}00 // ??
[22 CB FA F2 0D]    {float}1.0 // ??
[A1 E3 1A 9A 4E]    {32bit decimal}650 // ??
[A0 2A AA 13 F5]    {byte}01 // ??
[24 45 76 35 7A 82] {float}0.75, {float}1.0 // throttle input range necessary to activate
[A0 7E F3 93 B1]    {byte}01 // ??
[22 3C 89 BF 32]    {float}5.0 // minimum activation speed
[28 92 8F 52 41]	// ??
[28 13 12 3E 7D]	// ??
0B C5 66 C9 E5		// 5 bytes as noted by address 0x20.  Use unknown